Main Our Premium Architectural Finishes ToClay™ ProductsSAVON

01 / 01

Natural protective emulsion based on Marseille soap

Need an advice?

Application:

Finishing protective treatment for clay-lime and l

Composition:

Wax emulsion, black soap, water

Consumption:

0.1 kg/m² per single coat

+ additional specifications

SAVON is an ecological, deep-penetrating protective emulsion specially created for treating and maintaining natural clay, clay-lime, and lime decorative finishes. Based on natural colourless wax and traditional black soap, it provides genuine water-repellent protection without forming a film — preserving the breathable, vapour-permeable character of the underlying plaster.

Unlike synthetic sealers that trap moisture and suffocate natural finishes, SAVON works in harmony with the mineral coating — deepening the colour, enriching the texture, and protecting the surface from dust and stains without altering its vapour permeability. The result is a surface that looks richer, feels more refined, and endures longer.

SAVON is applied during the finishing process and should not be applied later than 24 hours after the final coat of decorative plaster. A single coat is typically sufficient; a second coat may be applied after the first has dried completely. Note: on light-coloured mineral finishes, slight yellowing may occur due to the natural composition of the product — always test on an inconspicuous area first.

Features

Natural and ecological composition — wax and black soap
Water-repellent effect without forming a film
Deepens and enriches colour
Protects plaster from dust and stains
Does not alter the vapour permeability of the coating
Easy to apply with a brush or roller
Touch-dry in 1–2 hours, fully dry in 24 hours
Available in 1 L, 3 L, and 5 L packaging
Shelf life: 24 months

Surface Preparation

Ensure the decorative plaster surface is fully dry and dust-free before applying SAVON. SAVON must be applied as part of the finishing process — no later than 24 hours after the final decorative coat. Suitable for interior decorative plasters based on clay and lime only.

Application

1. Shake SAVON thoroughly before use.

2. Apply to a dry, dust-free surface using a brush or roller (depending on the surface structure) until the surface is saturated.

3. If a second coat is required, apply after the first coat has dried completely (touch-dry: 1–2 hours).

4. Clean tools with water after use.

Warning

WARNING: SAVON is not recommended for surfaces in prolonged contact with water. When applying to light mineral finishes, slight yellowing may occur due to the natural composition — test on an inconspicuous area first to assess compatibility and visual effect. Do not eat, drink, or smoke while working. If it gets into the eyes, rinse with plenty of warm water. Keep out of reach of children. Do not dispose of waste into the drainage system. Store in a hermetically sealed container, away from sunlight, at +1°C to +35°C.

Visit Our Highett Showroom

Click to show map

Find the address of your nearest dealer

Your name*

City*

Email or Phone*

I agree with the conditions for the processing of personal data

In case there are no showrooms near you, we will help you purchase our products from our dealers, in the most convenient place for you.

Black soap and natural wax — the finishing touch your walls deserve.

Surface Preparation

Application

Warning

Visit Our Highett Showroom