Main Our Premium Architectural Finishes ToClay™ ProductsHOMA

01 / 01

if walls had a heart, it would be made of clay. This is more than just a decorative finish — it’s a living texture that breathes, feels, and evolves with the space

Need an advice?

Application:

Interior walls, ceilings, and built-in furniture (

Composition:

Natural clay, quartz sand, slaked lime, VA/E powde

Consumption:

1.5–2.5 kg/m² (2 coats)

+ additional specifications

HOMA is a dry powdered mineral mix based on clay, lime, and sand — a material born from the earth itself. Ready to use after mixing with water, it is designed to create decorative finishes with a natural texture and deep tactile character on interior surfaces, including walls, ceilings, and built-in furniture not directly exposed to moisture.

The material is created for interiors where not only aesthetics but also microclimate quality matter. Thanks to the natural properties of clay and lime, the coating allows walls to breathe, actively regulates air humidity and temperature fluctuations, absorbs foreign odours, and is even capable of neutralising toxic substances including formaldehyde. HOMA contains no cement, no VOCs, and no synthetic components — making it ecologically safe and genuinely conducive to a healthy indoor environment.

Produced using traditional methods with low energy consumption, HOMA is easy and convenient to apply with conventional plastering tools. It is ideal for residential, public, and commercial spaces where responsible finishing with a distinctive natural character is valued. Naturally repairable — chips and dents can be seamlessly restored at any time.

Features

100% natural — no cement, no VOCs, no synthetic components
Regulates indoor humidity and temperature naturally
Absorbs odours and neutralises formaldehyde
Ecologically safe for all living spaces including children's rooms
Non-combustible
Vapour permeable — walls breathe
Easy to restore after damage
Can be tinted with Palitro dry pigments
Available in 12 kg packaging (paper bag in recycled plastic bucket)

Surface Preparation

The substrate surface must be clean, dry, and load-bearing. Remove contamination, formwork oils, mortar residues, and flaking painted coatings. Smooth surface irregularities with finishing filler FinishSpachtel D60 or D70. Highly or poorly absorbent substrates must first be treated with Quartz Primer Grosso. Before applying HOMA, dampen the substrate with clean water (especially clay and lime substrates) — primed plasterboard or Quartz Primer Grosso-treated substrates do not require wetting.

Application

1. Pour the 12 kg HOMA package into a container with 4.5–5.5 litres of clean water at room temperature. Mix with an electric mixer at low speed until homogeneous. Rest for 10 minutes, then mix again. To tint: add Palitro pigments to the water first, mix until lump-free, then add HOMA.

2. Distribute the mix evenly over the surface in 2 coats with a total thickness of no more than 3 mm, using a plastering hawk and a metal trowel with broad, sweeping strokes.

3. Do not excessively rework the first coat after application. Once the area has begun to harden slightly (approximately 2–3 hours), apply the second thin finish coat using a slightly wetter mix.

4. After applying the second coat, wait 30 minutes to 2 hours until the coating stops shifting under the trowel and the wet sheen dulls. Smooth with a stainless steel Venetian trowel using random strokes. If too dry, carefully re-wet with a spray bottle or damp sponge.

5. Once fully dry, treat the surface with Velatura Vintage Matt, Savon protective emulsion, or other suitable coatings to enhance durability, water repellency, and stain resistance.

Warning

WARNING: During application and drying, air and substrate temperature must remain between +10°C and +30°C. Do not apply in direct sunlight, strong wind, fog, or high humidity, or if frost is expected within 24 hours. HOMA is composed of natural components with a limited pot life of 8 hours after mixing — prepare only the quantity needed for one working day. Clean tools with water immediately after use.

Visit Our Highett Showroom

Click to show map

Find the address of your nearest dealer

Your name*

City*

Email or Phone*

I agree with the conditions for the processing of personal data

In case there are no showrooms near you, we will help you purchase our products from our dealers, in the most convenient place for you.

100% natural. Breathes like the earth. Transforms any interior into a living space.

Surface Preparation

Application

Warning

Visit Our Highett Showroom